CVE-2026-46148spi: microchip-core-qspi: control built-in cs manually
Updated under an hour ago ()
Does this affect you?
It affects Linux and 1 other product. Add what you run to find out whether that includes you.
No exploitation reported and no EPSS estimate yet.
Do this next
Free account, 1 product
In the Linux kernel, the following vulnerability has been resolved: spi: microchip-core-qspi: control built-in cs manually The coreQSPI IP supports only a single chip select, which is automagically operated by the hardware - set low when the transmit buffer first gets written to and set high when the number of bytes written to the TOTALBYTES field of the FRAMES register have been sent on the bus. Additional devices must use GPIOs for their chip selects. It was reported to me that if there are two devices attached to this QSPI controller that the in-built chip select is set low while linux tries to access the device attached to the GPIO. This went undetected as the boards that connected multiple devices to the SPI controller all exclusively used GPIOs for chip selects, not relying on the built-in chip select at all. It turns out that this was because the built-in chip select, when controlled automagically, is set low when active and high when inactive, thereby ruling out its use for active-high devices or devices that need to transmit with the chip select disabled. Modify the driver so that it controls chip select directly, retaining the behaviour for mem_ops of setting the chip select active for the entire duration of the transfer in the exec_op callback. For regular transfers, implement the set_cs callback for the core to use. As part of this, the existing setup callback, mchp_coreqspi_setup_op(), is removed. Modifying the CLKIDLE field is not safe to do during operation when there are multiple devices, so this code is removed entirely. Setting the MASTER and ENABLE fields is something that can be done once at probe, it doesn't need to be re-run for each device. Instead the new setup callback sets the built-in chip select to its inactive state for active-low devices, as the reset value of the chip select in software controlled mode is low.
- CVSS
- 5.5 MEDIUM (v3.1, NVD)CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
- Weakness (CWE)
- Not given
- Known exploited
- Not in CISA's KEV catalog
- EPSS (exploitation in the next 30 days)
- Not loaded for this CVE
- Assigned by
- Linux
- NVD analysis
- Modified
- Record last updated
- Oct 21, 2026
- First seen by InfoSec Signals
- Oct 9, 2026
Affected products
Linux Linux linux:linux (from the name) | 8596124c4c1bc7561454cee0463c16eca70b5d25 builds before 783dc000b8be6d18713bde4d2705e168f2a61782; 8596124c4c1bc7561454cee0463c16eca70b5d25 builds before 244fc8942123afe753ae8962407fb312a1d96a07; 8596124c4c1bc7561454cee0463c16eca70b5d25 builds before 998f43196d732f20f9b71eb6ebd973736c9fa911; from 8596124c4c1bc7561454cee0463c16eca70b5d25 before ee3c99aa102212ad59dc2c19595515c4a6729307; 8596124c4c1bc7561454cee0463c16eca70b5d25 builds before 7672749e1496215e8683ce57cf323119033954cf | CNA record |
linux linux_kernel linux:linux_kernel | from 6.1 before 6.18.30; from 6.19 before 7.0.7; 7.1; 7.1 | NVD |
References
- https://git.kernel.org/stable/c/783dc000b8be6d18713bde4d2705e168f2a61782
- https://git.kernel.org/stable/c/244fc8942123afe753ae8962407fb312a1d96a07
- https://git.kernel.org/stable/c/998f43196d732f20f9b71eb6ebd973736c9fa911patch
- https://git.kernel.org/stable/c/ee3c99aa102212ad59dc2c19595515c4a6729307patch
- https://git.kernel.org/stable/c/7672749e1496215e8683ce57cf323119033954cfpatch
The CVE record on cve.org NVD's entry
The CVE record is authoritative. Products marked “from the name” were identified from the CNA's free-text names, not a CPE, and are matched less certainly. This product uses the NVD API but is not endorsed or certified by the NVD.